ماژول شارژر موبایل سوپر فست شارژ 65W نمایشدار QC4.0 مدل LX-FC528

Product sellpoints

• energy saving: The product has good cooling efficiency, low heat generation and energy saving.

• super strong: As a super strong traditional power car charger, the output voltage of the battery itself does not need to be out of normal charging cycle due to its extremely high and low temperature.

  Features:
  This fast charging module comes with voltage, current, power, display, and powerful functions.

  Digital display of voltage, current and power with separate fast charge indicator.
  It adopts high-quality solid capacitor, two-wire large inductance, and 3 screw positioning holes.
  The digital display shows the voltage by default, and the current and power display can be switched by pressing a button.
  Output overcurrent, input overvoltage, input undervoltage, output short circuit protection.

  Specifications:
  Interface: Type-c+USB dual interface
  Input voltage range: 6-35V, recommended within 33V.
  Output voltage range: 4V-20V, automatically adjusted according to fast charging protocol
  Support QC4+/QC4/QC3.0/QC2.0/FCP/AFC/SFCP/MTK/SCP/BC1.2/DCP
  Output overcurrent, input overvoltage, input undervoltage, output short-circuit protection
  With digital display, voltage, current and power can be switched by buttons
  Soft-start function
  Output voltage line compensation function, line compensation voltage 50mV@1A
  High-current USB interface
  3 x 3mm positioning holes
  BOARD SIZE: 36×38×11.3MM

  How To Use:
  DC interface or wire bonding interface input 6-35V voltage, it is recommended in the range of 12V-32V, the module is step-down charging, if you want to output 12V voltage, the input must be greater than 12V, the power supply ensures that the power is sufficient. Use a high-current mobile phone charging cable to charge the mobile phone (the quality of the data cable will affect the charging speed). The power indicator lights up when the bond wire is powered on. The digital display shows the voltage by default, and the current and power display can be switched by pressing a button. The current mode first shows “C” and the power mode first shows “P”.

  Protocol Introduction:
  Support PPS/PD3.0/PD2.0
  Support QC4+/QC4/QC3.0/QC2.0
  AFC/FCP is supported
  Support Samsung fast charging protocol AFC
  MTK PE+1.1 and MTK PE+2.0 are supported
  Supports LOW-PRESSURE SCRP/HIGH-PRESSURE SCP/SFCP
  BC1.2 DCP mode is supported

  Precautions for Use:
  The module supply voltage is higher than the output voltage because the module is step-down.
  The power supply power should be greater than ten percent of the load power, that is, in addition to ensuring the power supply voltage, it is also necessary to ensure that the power supply current is sufficient.
  The module is placed in a well-ventilated and fan-heated place, and hot melt adhesive or winding materials with poor thermal conductivity cannot be used.
  Module parameters refer to the power supply capacity of the module, and the actual charging power is determined according to the actual use of the mobile phone.
  When encountering problems with use, please operate in full accordance with the technical requirements, the technology is professional This can be guaranteed, if you want to insist on your opinion, we will not be able to do technical support. We must insist on that. If you do not agree, we will not provide any support.